1. 2. 3. material content data sheet sales product name ipd65r600c6 issued 28. september 2015 ma# ma001426154 package pg-to252-3-313 weight* 319.42 mg construction element material group substances cas# if applicable weight [mg] average mass [%] sum [%] average mass [ppm] sum [ppm] chip inorganic material silicon 7440-21-3 3.294 1.03 1.03 10312 10312 leadframe non noble metal iron 7439-89-6 0.147 0.05 461 inorganic material phosphorus 7723-14-0 0.044 0.01 138 non noble metal copper 7440-50-8 147.096 46.04 46.10 460511 461110 wire non noble metal aluminium 7429-90-5 5.000 1.57 1.57 15655 15655 encapsulation organic material carbon black 1333-86-4 1.365 0.43 4272 plastics epoxy resin - 23.880 7.48 74760 inorganic material silicondioxide 60676-86-0 111.211 34.82 42.73 348167 427199 leadfinish non noble metal tin 7440-31-5 3.787 1.19 1.19 11855 11855 plating inorganic material phosphorus 7723-14-0 0.003 0.00 11 non noble metal nickel 7440-02-0 1.421 0.44 0.44 4447 4458 solder noble metal silver 7440-22-4 0.074 0.02 232 non noble metal tin 7440-31-5 0.059 0.02 186 non noble metal lead 7439-92-1 2.835 0.89 0.93 8876 9294 heatspreader non noble metal iron 7439-89-6 0.019 0.01 60 inorganic material phosphorus 7723-14-0 0.006 0.00 18 non noble metal copper 7440-50-8 19.177 6.00 6.01 60039 60117 *deviation < 10% sum in total: 100.00 1000000 important remarks: infineon technologies ag provides full material declaration based on information provided by third parties and has taken and continues to take reasonable steps to provide representative and accurate information. infineon technologies ag and infineon technologies ag suppliers consider certain information to be proprietary, and thus cas numbers and other limited information may not be available for release. all statements are based on our present knowledge, are provided 'as is' and may be subject to change at any time due to technical requirements and development without notification. this product is in compliance with eu directive 2011/65/eu (rohs) and contains pb according rohs exemption 7a, lead in high melting temperature type solders. company infineon technologies ag address 81726 mnchen internet www.infineon.com
|
